MTD 050 thru 062 - Manual (Page 6)

6
SECTION 2: CONTENTS OF HARDWARE PACK
Remove this sheet from your operator’s manual and lay the hardware on the illustration for identification
purposes. After Assembly, keep the Slope Gauge which is on the reverse side of this sheet for future use.
(Hardware pack may contain extra items which are not used on your unit. Part numbers are shown in
parentheses.)
ATTACHING THE
LOWER HANDLE A ATTACHING THE
UPPER HANDLE
C
ATTACHING THE
STARTER ROPE
D
SECURING THE CABLE
INSTALLATION OF WHEELS
E
Hex
Bolts
3/8-24 x
1 1/2”
Long
(710-0459)
Spacers 3/8” I.D. x
7/8” O.D.
(750-0910)
Hex Lock Nuts
3/8-24 Thread
(712-0355)
Cupped Washers
3/8” I.D. x 7/8” O.D.
(736-0105)
Split Washers
5/16” I.D.
(736-0119)
Curved
Head
Bolts
(710-1250)
Hex Nuts
5/16-18 Thread
(712-0267)
Rope
Guide
(710-1205)
Hex Lock Nut
1/4-20 Thread
(712-0324)
Cable Ties -- Qty. 3
(726-0240)
Axle Bolts
Qty. 4
(738-0533)
Cupped Washers
3/8” I.D. x
1-1/8” O.D.
(736-0331)
Cupped
Washers
3/8” I.D. x
7/8” O.D.
(736-0105)
Hex Nuts
3/8-16 Thread
(712-0798)
B