Meco AUSSIE 7900 - Manual (Page 8)

8
Step 4) Install Drip Cup:
Insert Drip Cup into Drip Cup Holder ring until
the cup flange is flush with the ring and the
notch in the lip of the cup fits the vertical
hanger wire.
(17) Drip Cup
Step 5) Assemble Sidebraces and Rear Crossbrace:
· Attach Right and Left Sidebraces (19 & 20) to legs with ST4.0 x 10 Screws. (FIG. 5A) Secure
Bottom Heat Shield to Left Sidebrace with M4x10 Screws and M4 Wingnuts. (FIG. 5B) Allow Heat
Shield Edge to overlap Sidebrace edge.
(24) Rear CrossBrace
(Pre-assembled)
FIG. 5A
(21) Screw, ST4.0x10
6 pcs
FIG. 5B
(22) Screw,
M4x10
2 pcs
(23) M4 Wingnut
Heat Shield
edge over
Crossbrace
edge
(22) Screw,
M4x10
(19) Right Sidebrace
(20 Left Sidebrace
(21) Screw,
ST4.0x10
Bowl/Leg Screws
FIG. 5C
View Inside Bowl
(23) Wingnut, M4
2 pcs
Align groove
with vertical
wire