Meco AUSSIE 7900 - Manual (Page 12)

Step 11) Install Warming Rack/Cooking Grid:
Position Warming Rack as shown. (FIG. 11A)
Insert legs 1 and 2 in holes on right side of grill
Bowl and Hood respectively. While holding leg
3, insert leg 4 into hole on hood. Carefully
position leg 3 into hole in grill Bowl and allow
it to spring outward into position.
Lay Cooking Grid onto the Bowl ridges over the
Flame Diffuser and Main Burner. (FIG. 11B)
12
Step 12) Attach Fabric Panel:
Attach Fabric Panel to the velcro patches
behind the front legs as shown. (FIG. 12)
Note: Panel may be removed to install LP
Cylinder then re-attached.
(42) Cooking Grid
1 pc
(43) Fabric Panel
1 pc
FIG. 12
FIG. 11B
(42) Cooking Grid
Step 10) Install Flame Diffuser:
Place the Flame Diffuser over the Main Bowl
Burner, onto the two mounting studs on each
side of the Bowl. (FIG.10)
(40) Flame Diffuser
Flame Diffuser mounting stud in Bowl.
(40) Flame Diffuser
FIG. 10
(41) Warming Rack
1 pc
1
2
3
4
FIG. 11A
(41) Warming Rack