Meco AUSSIE 7900 - Manual (Page 7)

STEP 2) Assemble Axle, Wheels & Wheel Covers:
7
Step 3) Assemble Hood/Bowl to Cart:
· With Cart upright, align Bowl
Bracket legs with Cart legs. (FIG. 3A)
NOTE: REQUIRES 2-PERSONS
· Lower Hood/Bowl to allow ends of
Cart legs to insert into Bowl Bracket
legs.
· Press downward until leg screw holes
align.
· Insert M6x35 Screws and tighten
with M6 Locknuts. (FIG. 3B)
(15) Screw, M6X35
4 pcs
(16) M6 Locknut
4 pcs
(11) Nut, M8
2 PCS
(10) WHEEL
2 PCS
(12) WHEEL COVER
2 PCS
Push Axle through holes in Wheel Legs. Place Wheels
on both ends of Axle, then tighten with two M8 Nuts
with wrench or pliers. Align Wheel Cover pins with
3-holes in Wheel and snap flush against wheel.
(10) WHEEL
(12) WHEEL
COVER
(9) AXLE
(11) Nut, M8
WHEEL LEGS
FIG. 2
FIG. 3A FIG. 3B
(16) Screw, M6X35
(15) M6 Nut
(14) Hood/Bowl Assembly
Bowl Bracket Legs
(9) with Item (11) installed