beautypg.com

Others, Troubleshooting, Cause correction symptom – Memorex MVDP1072 User Manual

Page 44

background image

39

OTHERS

Troubleshooting

Please check

the following chart for solutions to your problem before contacting

any

service and support personnel.

Temporary

function failure

Mal-fabricated disc used.
Wrong buttons pressed.
Foreign static electricity leaks

inside the enclosure.

Wait for 5 to 10 seconds and this

player will restore normal functions.

Press other buttons.

Restart this player after powering

this player off for 1 to 2 minutes.

Too much in
terference strip
es on image

The rechargeable battery becomes

low

Recharge the battery.

Use the power adapter.

Cause

Correction

Symptom

No sound

No picture

No color

No disc reading

Signal not properly connected.
Disc warped or dirty.
Player in mute status.

Signal not properly connected.
TV not set for proper system.

TV system not right.
TV set color not properly adjusted.

No disc in the player.
Disc not properly loaded.
Condensation on the laser head.

Connect signal securely.
Clean your disc.
Press MUTE button again.

Connect signal securely.
Reset the AV/TV status of your

TV set.

Press P/N button on the remote

control to set the system.

Readjust color of your TV set.

Load a disc.
Reload a disc, with the label side

facing up.

Turn on the player, unload the

disc and leave it on for about one hour.

Remote control
failure

Remote control not pointing to the

sensor window.

Remote control's operating distance

more than 8 meters away from the sensor

window of the player

Batteries low.

Use the remote control properly.

Replace the battery.

Picture rolling

TV set system not properly adjusted.

Readjust system of your TV set.