Memorex MVDP1072 - Manual (Page 41)

36
Audio Setup
2. EQ type: To set EQ modes.
Optional settings: Off, ROCK, Pop, Live, Dance, Techno, Classic, Soft.
Default: Off.
1.
Audio output mode:
Set the audio output mode to make the multi-channel
audio into two-channel outputs.
Optional settings: LT/RT, STEREO, V SURR.
Default: STEREO
3. Sound Field : To set different sound field effects.
Optional settings: Off, Concert, Living room, Hall, Bathroom, Cave,
Arena, Church.
Default: Off.
4. SPDIF O utput: To set the bit stream type of the digital output.
Optional settings: SPDIF/RAW, SPDIF/PCM.
Default: SPDIF/RAW.
5. Out LPCM To set the output frequency of the 96K LPCM audio data to fit
for different power amplifiers.
Optional settings: 48K, 96K.
Default: 48K.
6. Dolby Digital setup:
A.
L+R: To set the output means of the left or right audio when playing a Dolby
disc with separate two-channel audio
Optional settings: Stereo, L-Mono,R-Mono, Mix-Mono.
Default: Stereo.
B. Dynamic compression: To set the linear compression ratio to get different
compression result.
Optional settings: OFF 1/8 1/4 3/8 1/2 5/8 3/4 7/8 FULL
Default: OFF.
Audio Setup Page
Audio Mode
EQ Type
Sound Field
SPDIF Output
LPCM Out
Dolby Digital Setup
Stereo
Off
Off
RAW
48K
FUNCTION SETUP