Motorola VT1000 - Manual (Page 23)

17
VT1000 Series Voice Terminal User Guide
Wait about two minutes for the Motorola voice terminal to start up. The POWER light
blinks as described in “
Front Panel ” on page 7.
8 After the POWER light on your Motorola voice terminal turns on solid green, pick up
the telephone hand set and listen for a dial tone
• If you hear a dial tone, you can now call anyone as you normally would on any
telephone.
• If you do not hear a dial tone, check that all connections described in this
procedure are correct. If you still do not hear a dial tone, you may need to
connect a computer to your Motorola voice terminal and perform
Basic
Configuration (see page 19). If after performing Basic Configuration, you still do
not hear a dial tone, see “ Troubleshooting ” on page 26 or call your VoIP
provider.