Maytag W10445417B - Manual (Page 13)

13
For direct wire installations:
ELECTRIC INSTALLATION
For power supply cord installations:
Remove hold-down screw and terminal block cover.
1.
Choose electrical connection type
Power supply cord 4-wire receptacle
(NEMA Type 14-30R).
Go to “Power Supply Cord Connection.”
3-wire direct connection:
Go to “Direct Wire Connection.”
4-wire direct connection:
Go to “Direct Wire Connection.”
Power supply cord 3-wire receptacle
(NEMA Type 10-30R).
Go to “Power Supply Cord Connection.”
2.
Remove terminal block cover
Before you start: disconnect power.