Philips Magnavox MTV-34 - Manual (Page 8)

8
DESCRIPTION OF OPERATION
You can press the buttons on the remote control or the menu button on the TV set to adjust the picture, clock, preset,
system and audio (68cm only) according to the menu shown on the screen.
PICTURE
bright 45
contrast 63
colour 63
sharp 63
tint 63
---------+-----
AUDIO
(MTV-68 ONLY)
volume 32
balance 00
---------+-----
SYSTEM
colour-sys auto
sound-sys 5.5m
coring on
PRESET
pos. 0
rem. on
band v-l
fine
semi-search
auto-search
---------+-----
CLOCK
time 16:00
on-time --:--
off-time --:--
prompt --:--
ch-time 16:25
pos. 10
AUTO-SEARCH OPERATION
This function will automatically set the channels on 1,2,3,4 . If you wish to set the correct stations on the corresponding
channels see ‘Channel Position.’
1. Press ‘PRE’ button on the remote control to display the preset menu.
2. Press ‘P /P ’ channel button to select AUTO-SEARCH item.
3. Press ‘VOL /VOL ’ volume button to start auto-search.
PRESET
pos. 0
rem. on
band v-l
fine
semi-search
auto-search
---------+-----
NOTE: You can store the TV channels from ‘0’ position in numeral sequence. The channel position will be ‘0’ again when
search is finished. The colour of ‘0’ turns green when the program has been searched. Otherwise, it turns red.
BASIC OPERATION
5368 MTV-34-68 CTV U&C Update.indd 12/9/2002, 4:42 PM 8