Philips Magnavox MTV-34 - Manual (Page 10)

10
Introduction
CLOCK MENU OPERATION
Press the MENU button on the set four times or the CLOCK button on the remote control to display the clock menu.
24 hour clock setting (The clock must be set before you select the other items)
1. Press ‘P /P ’ button to select TIME item.
2. Press ‘VOL ’ button to set the hour. Press ‘VOL ’ button to set the minute.
NB: If you turn off the set at the wall or on the set itself you will have to reset the clock.
on-time and off-time
1. Press ‘P /P ’ button to select ON-TIME or OFF-TIME item. The green colour turns red.
2. Press ‘VOL ’ button to set the hour. Press ‘VOL ’ button to set the minute.
NOTE: When ON-TIME item is set, press POWER button on the remote control. Make sure the TV set is under stand-by mode.
When OFF-TIME item is set, the SLEEP function is cancelled automatically.
prompt (Prompting the time & Presetting the position)
1. Press ‘P /P ’ button to select PROMPT or CH-TIME item. The green colour turns red.
2. Press ‘VOL ’ button to set the hour. Press ‘VOL ’ button to set the minute.
NOTE: Presetting the position: For example, the time is 16:20 and the position is at channel 5 at present. If CH-TIME
is preset at 17:00 and the position is preset to channel 8, the position will change to channel 8 automatically while the
time is 17:00.
Prompt time: The word ‘PROMPR’ will display on the screen and keep on twinkling at the prompt time preset.
CLOCK
time 16:00
on-time --:--
off-time --:--
prompt --:--
ch-time 16:25
pos. 10
Basic Operation
Basic Operation Basic Operation
5368 MTV-34-68 CTV U&C Update.indd 12/9/2002, 4:42 PM 10