MITSUBISHI ELECTRIC LVP-X30U - Manual (Page 28)

E – 26
Setting the Video Type
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor
$
/
%
keys to select “COLOR”.
2
Use the cursor
{
/
}
keys to select
“VIDEO TYPE”.
3
Use the cursor
$
/
%
keys to set the
“VIDEO TYPE”.
The following can be selected.
● DVD ● VCR
DVD is used for DVD players and VCR is used for
normal video players.
Selecting the Color System
The following color systems can be used with this device.
● NTSC 3.58
● NTSC 4.43
● PAL ● PAL-M ● PAL-N ● PAL60
● SECAM
Only NTSC 3.58 and PAL can be used for component
video.
Selection is automatic when AUTO is used.
1
Select an input for the color system to be
selected (page 16).
2
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor
$
/
%
keys to select “COLOR”.
3
Use the cursor
{
/
}
keys to select
“COLOR SYSTEM” and then press the
ENTER button.
4
Use the cursor
{
/
}
keys to select the
desired color system.
S e t t i n g N a r r o w I m a g e s ( A d v a n c e d
M e n u )
Set the colors as desired in accordance
with the image contents.
Subtle color settings are possible, as desired. Setting is
possible for each input.
1
Select the image to be input (page 16).
2
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor
$
/
%
keys to select “COLOR”.
3
Use the cursor
{
/
}
keys to select
“GAMMA”.
4
Use the cursor
$
/
%
keys to set the
“GAMMA”.
The following can be selected.
● Normal ● Natural ● Real ● Custom
Normal is standard settings; Natural stresses
coloring; Real stresses (brightness). Custom is
used to adjust freely as desired.
5
Use the cursor
$
/
%
keys to select
“CUSTOM”, press the ENTER button to
display the sub-menu and then set the
gamma value. There are 33 index values.
Adjusting Color Balance
Color balance (white balance) can be set for each input.
1
Select the image to be input (page 16).
2
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor
$
/
%
keys to select “COLOR”.
3
Use the cursor
{
/
}
keys to select
“COLOR TEMP”.
4
Use the cursor
$
/
%
keys to select the
“COLOR TEMP”.
Four different types of color balance can be set
beforehand: Low, Medium, Standard and High.
When the ENTER button is pressed, the
sub-menu will be displayed to enable fine
adjustment.
To close the menu
Press the CANCEL button.