Pip function, Monitoring – Metz Astral MF PIP 72TF81 User Manual
Page 48
48
12. PIP function
Monitoring with a video camera
The following example shows how you can monitor another room with a camcorder (video camera) while watching a TV programme.
Connect the camcorder to the TV set as described on Page 51 of the Operating Instructions for your TV.
1. Select the camcorder pro-
gramme position and switch
on the camcorder
2. Call the PIP function and, if
necessary, switch to ano-
ther programme position
3. Swapping the pictures
If this programme position has already been overwrit-
ten, you must programme another position as follows:
1. Call the station table by pressing the white key.
2. Call the sub-menu „Signal“ by pressing the white
key.
3. Press the appropriate coloured key to select the
socket marked „Camcorder“. Note that a camcor-
der must have been programmed previously in the
menu „Device connection“.
When the PIP function is switched on, both pictures
are identical.
If you then select another programme position with the
numerical keys, the PIP picture continues to display
the input from the camcorder and the main picture
displays the newly selected programme position.
The two pictures can be swapped by pressing the
key.
To switch off the PIP function, press the red key or the
key.
TV
PRG.
CAMCO
Monitoring
PRG.
ARD
Monitoring
0
1
2
3
4
5
6
7
8
9
Press this key on the remote
control....
The screen displays
Explanation
red
- Spectral-MF PIP 72 TF 80 - 100 HT Astral-MF PIP 72 TF 81 - 100 HT Taros-MF PIP 72 TF 82 - 100 HT Carat-SF 72 TF 83 - 100 HT Stratos-SF-PIP 72 TF 86 - 100 HT Kreta-SF 72 TF 87 - 100 HT Mondial-S PIP 84 TF 88 - 100 HT Protos-MF PIP 72 TF 89 - 100 HT 72 TF 80 72 TF 81 72 TF 82 72 TF 83 72 TF 86 72 TF 88 84 TF 88 72 TF 89