MicroNet Technology SP916GK - Manual (Page 23)

- 20 -
Attain DNS
automatically: If your DNS provided by ISP is dynamic, choose
“Attain DNS automatically
Set DNS Manually To specify the DNS, enter the DNS provided by your
ISP in DNS 1 2 3.
PPPoE Mode
User Name, password
and service name Fill in the User Name, password and service name
that provided by your ISP.
Connection Type “Continuous” is for Always keeping connection
“Connect on demand” is for billing by connection
time. You can set up the Idle time for the value
specifies the number of time that elapses before the
system automatically disconnects the PPPoE
session.
“Manual” is to connect to ISP manually. Click
“Connect” from the WEB user interface. The WAN
connection will not disconnect due to the idle
timeout. If the WAN line breaks down and later links
again, the router will not auto-connect to the ISP.
Idle Time: Defines the amount of idle time that elapses before
the system automatically disconnects the PPPoE
session.
MTU Size Enable the Maximum Transmission Unit of the
router. Any packet greater than this number will be
chopped up into suitable size before sending. The
larger the number, the better transmission
performance. Enter your MTU number in the text-box
to set the limitation.
Attain DNS If your DNS provided by ISP is dynamic, choose