MicroNet Technology SP916GK - Manual (Page 16)

- 13 -
Click <Apply changes> button at the bottom of the screen to save the above
configurations. You can now configure other advanced settings or start using the
router (with the advance settings in place)
Active Wireless Client Table
This is the window that pops up after clicking the “Show Active Clients” button.
MAC Address MAC address of this active wireless station.
Tx Packet The number of transmitted packets that are sent
out from this active wireless station.
Rx Packet The number of received packets that are received
by this active wireless station.
TX Rate The transmission rate
Power Saving Shows if the wireless client is in Power Saving
mode
Expired Time This is the time in second before dissociation. If
the wireless keeps idle longer than the expired
time, this wireless router will dissociate it. The
wireless client station has to re-associate when it is
active.
Refresh Refresh the "Active Wireless Client Table".
Close Close the "Active Wireless Client Table".
Advanced Setting
You can set advanced wireless LAN parameters of this router. The parameters
include Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval,
Data Rate, Preamble Type, Broadcast SSID, IAPP and 802.11g Protection. We
recommend not changing these parameters unless you know what these changes
will do to the router.