MicroNet Technology SP916GK - Manual (Page 21)

- 18 - 18
3.5 TCP/IP Setting
LAN Interface Setting
This sections cover how to set up the configuration of LAN interface, Private IP of
you router LAN Port and Subnet mask for your LAN segment.
Configuration
IP address The IP of your Router LAN port (Default 192.168.1.1)
Subnet Mask Subnet Mask of you LAN (Default 255.255.255.0)
DHCP Server
To give your LAN Client an IP, you have to enable “DHCP
Server”. Setting up your client IP manually is necessary
when you want to use the router as your client’s default
gateway.
DHCP Client
Range
Specify the DHCP Client IP address range. You can also
click the “Show Client” button to list the connected DHCP
clients.
802.1d
Spanning tree
To prevent from network loops and preserve the quality of
bridged network
Enable UPnP
Mark this checkbox to allow this router to be recognized
by UPnP.
WAN Interface Setting
This page allows users to configure those parameters for connecting to Internet. You
may select the WAN Access Type from the drop list and configure parameters for
each mode.