McIntosh MA7000 User Manual

Page 11

How to use the Remote Control

The supplied Remote Control is capable of directly con-

trolling the functions of contemporary McIntosh Source

Components connected to the MA7000 via the Data Ports.

Input Source Selection

Press the appropriate Source Push-button to select the

desired program source.

Mute

Press the MUTE Push-button to mute the audio in all

outputs except the REC OUTPUT. The MUTE LED above

the push-button will flash on and off to indicate that Mute

is active. To un-mute the audio, press the MUTE Push-but-

ton again.

Mono

Press the MONO Push-button to switch from Stereo to

Mono for Monophonic listening.

Disc, Server and Tape Functions

Use these push-buttons to operate a DVD Player, CD

Player, CD Changer, Music Server or Tape Recorder.

Numbered Push-buttons

Press Push-buttons 0 through 9 to access tuner station pre-

sets, tracks on discs or selections on a Music Server.

Disc and Track

Use the DISC and TRACK Push-buttons when a Disc

Player or Music Server is being used.

Tuner Push-buttons

Press the AM or FM Push-button to select the desired

broadcast band. Press and release the Channel Up or

Down Push-button to move from station to station. Press

and hold a Channel Up or Down Push-button to move

continuously from station to station. Press +10 Push-button

to start the automatic brief audition of each of the pre-

sets stored in the tuner memory. Press +10 Push-button a

second time to stop on a station preset and exit the review

process.

Volume

Press the Up or Down VOLUME Push-button to raise

or lower the listening volume level.

Note: The Record Signals present at REC OUTPUTS are not

affected by volume changes.

Pause

Press the Pause Pushbutton to perform various functions

on a variety of McIntosh Components. It will also pause

the playing of a disc or tape player. The Pause Push-but-

ton will also allow for quick exiting from the active menu

when in the setup mode. The Pause Push-button is also

used as an Enter Push-button with some McIntosh compo-

nents

Acc On/Off

Press ACC ON to turn the power ON or ACC OFF switch-

es AC Power ON or OFF to certain McIntosh Components

when connected via the Data Port and any McIntosh Com-

ponents connected to the ACC Power Control Jack.