GE 29438 - Manual (Page 8)

8
S
ET
U
P
1. Adjust the ringer volume by pressing
the VOLUME arrow buttons until you
reach the desired setting.
2. Set the PULSE/TONE switch to TONE if
you have Touch-Tone service, or to
PULSE if you have Pulse (rotary)
service.
3. Set the 12-hour display clock by
pressing the SET button, and then the
corresponding time (0455 for 4:55, for
example).
D
ISPLAY
The display shows you information, such
as the current time, the duration of a call,
or the phone number you are currently
dialing (the last 12 digits dialed appear in
the display).
Display item Meaning
TONE The TONE/PULSE switch is set to TONE.
TEMP TONE The Temporary Tone feature is active.
LINE 1 DATA PORT The Data Port switch is set to Line 1 .
DATA PORT LINE 2 The Data Port switch is set to Line 2.
If flashing,—battery is low and needs to be changed.
If not flashing — battery is dead or not installed.
n Represents the pound key (#) in a number sequence.
A Represents the asterisk key (*) in a number sequence.
P Represents a Pause in a number sequence.
F Represents the Flash key in a number sequence.
[number (1-16] A number in brackets indicates the upper memory
location of a phone number.
[number (1-16) L] A number followed by "L" in brackets indicates the
lower memory location of a phone number.
FLASH BUSY REDIAL PAUSE REDIAL
CONF
MEMO SET
TIMER STORE/IN
TWO LINE DATAPHONE
LOWER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MUTE
VOL
SPEAKER
WX
YZ
9
MNO 6
DEF 3
#
TUV 8
JKL 5
ABC 2
OPER 0
PQ
RS 7
GHI 4
1
TONE *
line 2
line 1
HOLD
SET button
VOLUME arrow buttons
PULSE/TONE switch