Graco PM-1589AB - Manual (Page 30)

Removing Seat Pads:
If using harness system, remove harness system
(see Harness System - removing and
re-assembly” section).
Slide “J” hooks out of front slots.
Unhook elastic from “J” hooks.
Pull two button clips out (located on inside of
seat pad) and pull pad off.
Pull attachment strip apart.
Removing Armrest Pads.
Pull attachment strips apart and pull pads off.
Reverse above steps for replacing pads and
harness system.
❃
Care & Cleaning
28
1
4
1
2
2
4
5
5
2
3
3
ADDITIONAL INFORMATION
(continued)
5