Graco PM-1589AB - Manual (Page 18)

HARNESS SYSTEM
- removal and re-assembly
16
Harness Removal:
• Lift adjuster bar and pull both harness straps
out of current slots.
• Pull harness strap out of car seat, harness tie,
and tongues.
Store all parts for future use.
Crotch Strap Removal:
• Turn car seat upside down, pry metal
rod loose and pull rod out of crotch strap
end (fig. i - page 15).
CAUTION: Be careful not to damage
webbing with screwdriver.
• Turn car seat upright and pull crotch strap
and buckle out.
Re-assembly:
When re-assembling harness system, be sure
harness straps are not twisted.
Thread end of harness strap down through slot
in seat pad, across bottom and back up
through slot in opposite side of car seat pad.
Thread ends through tongues or shields
(available on some models).
Thread ends through harness tie.
Thread ends through desired slots and adjuster
following instructions in “Operations and
Adjustments” section.
Install buckle and crotch strap following
instructions in “Operations and Adjustments”
section.
1
2
3
4
5