Graco SMART SEAT PD163434A - Manual (Page 36)

D
A
1. Test base for secure installation. See sections 9.0 and
10.0 for base installation, p. 30-33
A
.
2. Push in
B
and rotate knobs
C
on both sides of child
restraint to unlock position.
3. Place on base in forward-facing position D .
4. Rotate knobs on both sides to lock seat to base E .
You will see lock symbols in windows on side of base
as shown
H
.
5. If you see the red flags up in the child restraint
seating area F and you see the unlock symbol I
then seat is not secured to base.
6. Check seat is secure by moving front to back and left
to right at the belt path
G
. Base should not move
more than 1 inch ( 2.54 cm). If belt loosens or
lengthens, repeat procedure.
Note: See “13.0 Tether Use”, p. 38 to attach tether.
12.0
FORW
ARD-F
ACING
INST
ALL
ATION
F