Connecting the monitor, Connecting video inputs, To connect video sources to your monitor – Gateway HD2202 User Manual
Page 6
CHAPTER 1: Using Your Gateway Flat-Panel Monitor
2
Connecting the monitor
Connecting video inputs
To connect video sources to your monitor:
1
Position your computer and the monitor so you can reach the back of each.
2
Connect the blue VGA video cable to the blue VGA video connector under the back of the
display.
3
Ensure your computer is turned off. Connect the other end of the VGA cable to the video
port on the back of your computer.
- OR -
If your computer has a digital video connector (DVI), connect a DVI video cable to the white
connector under the back of the display.