Grandstream Networks MOBOTIX GXV-3140 - Manual (Page 5)

Grandstream Networks, Inc. Mobotix T24S Door System Configuration Guide For GXV3140 Page 5 of 16
www.grandstream.com Last Update : 01/2012
Figure 3: GXV3140 “provisioned by Mobotix” LCD Idle Screen
5. The T24S Door Station and GXV-3140 phone are now ready.
Here is a summary of the changes made automatically on both the GXV-3140 and T24S Door Station:
 SIP server in the T24S is activated automatically.
 GXV-3140 IP Video phone and the T24S are configured to use DHCP, and are automatically assigned an IP
address and SIP quick-dial number.
 Pushing the bell button located on the camera module (if available) calls all connected GXV-3140 phones ( “if they
were connected to the network during the initial Setup”) (This behavior can be reprogrammed using MxEasy).
 In order to call from the GXV-3140 to the T24S Door System, you only need to lift the Handset.
D
ISCOVER
/C
ONFIGURE A
GXV-3140
PHONE AUTOMATICALLY WITH AN EXISTING
D
OOR
S
YSTEM
In this section we will describe how to Discover and Configure the phone automatically using the MxEasy software
provided by Mobotix (www.mobotix.com under Support > Software Downloads > MxEasy).
In order to Discover/Configure the phone using MxEasy please proceed as follows:
1. Open MxEasy software  Camera  Door Station Option, you will now be prompted to the configuration page for
the door bell action :