Grandstream Networks MOBOTIX GXV-3140 - Manual (Page 4)

Grandstream Networks, Inc. Mobotix T24S Door System Configuration Guide For GXV3140 Page 4 of 16
www.grandstream.com Last Update : 01/2012
3. Connect the GXV-3140 and T24S Door Station to the switch/router as shown below :
Figure 2: Connecting the GXV-3140 and T24S
4. The buttons will light up for four seconds. During this time, press the doorbell button (bottom button) until that it
starts flashing. This starts automatic initial configuration, which will take around 5 minutes:
 The T24S lights blink as the camera starts up.
 The current T24S IP addresses and network data are announced automatically.
 Each GXV-3140 phone is contacted and configured by the camera.
 Each GXV-3140 phone restarts automatically each time the MOBOTIX configuration is updated.
 *101 is the new SIP quick-dial number for the first GXV-3140, while the T24S has the *201 SIP quick-dial number
 The phone idle screen display will change to the following :