Grizzly G1163 - Manual (Page 12)

- 10 - G1163 Portable Dust Collector
Fit the collection bag to the outfeed end of the
collector body and secure with the provided
clamp.
See Figure 5 .
Figure 5. Bag clamped to the outlet end of the
collector body.
This dust collector is wall mountable. Secure the
two mounting brackets to your shop wall with four
(4) screws or four (4) nails. The holes on the
mounting brackets must be 6
3 /
4
" apart to accom-
modate the width of the mounting holes on the
base. (Some additional blocking may be required
to ensure wall strength is sufficient to support the
dust collector.)
See Figure 6.
Also, mount your unit so that the collection bag
just touches the floor when fully inflated. This will
eliminate undue bag stretching and stress on the
collector body when the bag begins to fill. Be sure
that your floor surface is smooth so that the bag
will not catch and be ripped or torn.
Figure 6. Mounted on wall bracket.
Collection Bag Wall Mount Bracket