GarrettCom P62-Series - Manual (Page 11)

Magnum P62-Series Hardened Switches Installation and User Guide (08/03)
7
www GarrettCom com . .
2.0 INTRODUCTION
2.1 Inspecting the Package and Product
Examine the shipping container for obvious damage prior to installing this product;
notify the carrier of any damage that you believe occurred during shipment or delivery. Inspect
the contents of this package for any signs of damage and ensure that the items listed below are
included.
This package should contain:
1 Magnum P62-Series Hardened Switch (P62F-xxx or mP62-xxx)
1 Installation and User Guide
1 Product Registration Card
(Optional, if AC power)
1 PSX-A Power Source Extended Temp. unit
1 6 ft. long AC Power chord (for PSX-A Unit only)
(Optional, PSX-T, 125 or 250VDC)
1 PSX-T Power Source Extended Temp. unit
Remove the Magnum P62-Series Hardened Switch from the shipping container. Be
sure to keep the shipping container should you need to ship the unit at a later date. To validate
the product warranty, please complete and return the enclosed Product Registration Card to
GarrettCom, Inc. as soon as possible.
In the event there are items missing or damaged, contact your supplier. If you need to
return the unit, use the original shipping container. Refer to Chapter 5, Troubleshooting, for
specific return procedures.