GoVideo DDV9500 - Manual (Page 22)

20 DUAL-DECK VCR USER'S GUIDE
Copy Mode
Your Dual-Deck VCR offers three copy modes: Auto, HQ1
and HQ2. HQ (High Quality) refers to Go-Video’s patented
AmeriChrome Circuitry for optimal duplicating results. To
set the Copy Mode:
1
Press
MENU
until the DUAL-DECK FEATURES menu
appears.
2
Press “2” to select COPY TAPE SETTINGS.
3
Press “1” repeatedly to set COPY MODE to:
Auto - Automatically selects the best copy mode based on
the speed of the source tape.
HQ1 - Best if the source tape is in SP or for any tape with
Copy Guard.
HQ2 - Best if source tape is in LP or SLP without Copy Guard.
Set the Copy Mode to
Auto, HQ1 or HQ2
Speed Matching ensures that
both decks are synchronized
for optimal copy quality
Speed Matching
During a Copy Tape session, Speed Matching automatically
sets the Deck 2 record speed to be the same as the Deck 1
playback speed. You will get the best copy quality when this
feature is turned on.
1
Press
MENU
until the DUAL-DECK FEATURES menu
appears.
2
Press “2” to select COPY TAPE SETTINGS.
3
Press “2” repeatedly to set SPEED MATCHING to:
On - Use when optimal copy quality is desired. The record-
ing speed will automatically match the play speed in
Deck 1.
Off - Use only if you want to record two or more SP tapes
onto one SLP tape. If so, you must set the Record
Speed manually in the DECK TWO SETTINGS menu
(see page 28).
I
f you wish to view a TV program
while copying a tape, push TV VIEW
until you see the Tuner, then change
channels with the remote.