Oven door, Care and cleaning – GE Monogram ZET1038 User Manual
Page 31
31
To clean
the door
Inside of the door:
• Because the area inside the gasket is cleaned
during the self-clean cycle, you do not need to
clean this by hand. Any soap left on the liner
causes additional stains when the oven is
heated so be sure to rinse thoroughly.
• The area outside the gasket can be cleaned
with a soap-filled scouring pad.
• Do not rub or clean the door gasket—
the fiberglass material of the gasket has an
extremely low resistance to abrasion. An intact
and well-fitting oven door gasket is essential
for energy-efficient oven operation and good
baking results. If you notice the gasket
becoming worn, frayed or damaged in any
way or if it has become displaced on the oven,
you should have it replaced.
Outside of the door:
Painted Surfaces
(on some models)
Clean these with soap and water or a vinegar
and water solution.
Do not use commercial oven cleaners, cleaning
powders, steel wool or harsh abrasives on any
painted surface.
Stainless Steel Surfaces
(on some models)
Do not use a steel-wool pad; it will scratch
the surface.
To clean the stainless steel surface, use CERAMA
BRYTE
®
Stainless Steel Appliance Cleaner. Apply
with a damp cloth, clean the surface and wipe with
a dry cloth or paper towel to a high gloss. Repeat
if necessary.
To order
To order CERAMA BRYTE
®
Stainless Steel
Appliance Cleaner, please call our toll-free
number:
National Parts Center
800.626.2002
CERAMA BRYTE
®
Stainless Steel Appliance
Cleaner . . . . . . . . . . . . . . . . . .# PM10X311
Gasket
Care and Cleaning
Wall Oven