GE Monogram ZET1038 - Manual (Page 30)

30
Care and Cleaning
Wall Oven
Oven lights Each oven is equipped with two halogen lights
located on the back wall of the oven. The lights
come on when the door is opened or when the
oven is in a cooking cycle. The oven lights do
not come on during self-cleaning.
Each light assembly consists of a removable lens
frame, a removable lens, a light bulb and a bulb
socket that is fixed in place.
CAUTION: Before replacing the bulb,
disconnect electrical power to the oven at the
main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool
completely.
For your safety, do not touch a hot bulb with
bare hands or a damp cloth.
To remove:
Remove the lens frame by unscrewing
the screw.
Remove the lens.
Using gloves or a dry cloth, remove the bulb
by pulling it straight out.
To replace:
Use a new 12-volt Halogen bulb, size T3, G4
pins, not to exceed 20 watts.
NOTE: Higher wattage bulbs will damage
your oven.
Using gloves or a dry cloth, remove the bulb
from its packaging. Do not touch the bulb
with bare fingers.
Push the bulb straight into the receptacle all
the way.
Replace the lens, making sure that it is
firmly pressed in place.
Replace the lens frame and fasten in place
with the screw. The lens and lens frame must
be in place when using the oven.
For improved lighting inside the oven, clean the
glass cover frequently using a wet cloth. This
should be done when the oven is completely cool.
Reconnect electrical power to the oven.
Replacement bulbs may be purchased
by calling 800.626.2002. Order Part Number
WB08X10002.
Halogen
Bulb
Lens frame
Screw
Lens
Bulb socket