Connecting and starting your notebook, To connect and start your notebook, Important – Gateway M500 User Manual
Page 8
2
Chapter 1: Getting Started
www.gateway.com
Connecting and starting your
notebook
To connect and start your notebook:
1
Turn your notebook over so the bottom is facing up.
2
Insert the battery at an angle (1), press gently on the battery (2) until it
clicks into place. Then slide the battery lock latch into the locked
position 3).
Important
When using a battery for the first time, fully recharge the
battery, then disconnect the adapter to use up the battery
charge before recharging again. Perform this action twice
to condition the battery.