beautypg.com

Symbols on the machine, Symbols in the operator’s manual, Key t o symbols – Garmin TRIOBRAKE 353 User Manual

Page 2: Symbols on the mac hine, Symbols in the operator’ s manual

background image

KEY

T

O SYMBOLS

2

English

Symbols on the mac

hine:

W

ARNING! Chain saws can be

dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.

Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.

Always wear:

Approved protective helmet

Approved hearing protection

Protective goggles or a visor

This product is in accordance with
applicable EC directives.

Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.

WARNING!Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.

Decompression v

alve:

The valve is to

reduce the pressure in the cylinder and
make starting easier. You should always
use the decompression valve when
starting the machine.

Ignition;

choke:

Set the choke control

in the choke position. This should
automatically set the stop switch to the
start position.

Air purge

Adjustment of the oil pump

If your machine bears this symbol
it is equipped with a catalytic
converter.

Chain brake, activated (right)
Chain brake, not activated
(left)

Other symbols/decals on

the machine refer to special
certification requirements
for certain markets.

Symbols in the operator’

s

manual:

Switch off the engine b

y moving the

stop switch to the STOP position
before carrying out any checks or
maintenance.

Always wear approved protective
gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must
be worn.

Refuelling.

Filling with oil and adjusting oil flow.

The chain brake must be engaged
when the chain saw is started.

WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a
lightning fast reverse reaction, kicking
the guide bar up and towards the
operator. May cause serious personal
injury.

This manual is related to the following products: