beautypg.com

Vibration damping system, Stop switch, Muffler – Garmin TRIOBRAKE 353 User Manual

Page 10: Cutting equipment, General rules, General safety precautions

background image

GENERAL SAFETY PRECAUTIONS

10 – English

Vibration damping system

Your machine is equipped with a vibration damping
system that is designed to minimize vibration and make
operation easier.

The machine

′s vibration damping system reduces the

transfer of vibration between the engine unit/cutting
equipment and the machine

′s handle unit. The body of the

chain saw, including the cutting equipment, is insulated
from the handles by vibration damping units.

Cutting hardwoods (most broadleaf trees) creates more
vibration than cutting softwoods (most conifers). Cutting
with cutting equipment that is blunt or faulty (wrong type
or badly sharpened) will increase the vibration level.

Stop switch

Use the stop switch to switch off the engine.

Muffler

The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.

In areas with a hot, dry climate there is a high risk of fires.
These areas are sometimes subject to government rules
requiring among other things the muffler must be
equipped with an approved type of spark arrestor mesh.

Cutting equipment

This section describes how to choose and maintain your
cutting equipment in order to:

Reduce the risk of kickback.

Reduce the risk of the saw chain breaking or jumping
off the bar.

Obtain optimal cutting performance.

Extend the life of cutting equipment.

Avoid increasing vibration levels.

General rules

Only use cutting equipment recommended by us!
See instructions under the heading Technical data.

!

WARNING! Overexposure to vibration
can lead to circulatory damage or nerve
damage in people who have impaired
circulation. Contact your doctor if you
experience symptoms of overexposure
to vibration. Such symptoms include
numbness, loss of feeling, tingling,
pricking, pain, loss of strength, changes
in skin colour or condition. These
symptoms normally appear in the
fingers, hands or wrists. These
symptoms may be increased in cold
temperatures.

!

WARNING! The exhaust fumes from the
engine are hot and may contain sparks
which can start a fire. Never start the
machine indoors or near combustible
material!

CAUTION! The muffler gets very hot during and after
use. This also applies during idling. Be aware of the fire
hazard, especially when working near flammable
substances and/or vapours.

!

WARNING! Never use a saw without a
muffler, or with a damaged muffler. A
damaged muffler may substantially
increase the noise level and the fire
hazard. Keep fire fighting equipment
handy. If a spark arrestor screen is
required in your area, never use the saw
without or with a broken spark arrestor
screen.

This manual is related to the following products: