Graco 8474 User Manual

Page 8

background image

8

2.1 Removing and Attaching Base

2.2 Adjusting Handle

To remove infant restraint, squeeze release

handle at back of seat and lift infant

restraint from base as shown

.

To put infant restraint in base, push infant

restraint down until it clicks into base.

Pull up on infant restraint to be sure

it is latched firmly into base.

1. Press handle adjustment buttons on

both sides of handle

.

2. Rotate handle until it clicks into any

of three positions (for carrying,

reclining, or sitting). BOTH handle

adjustment buttons must pop out

to lock handle in place

.

3. Push and pull on the handle to be

sure it is locked firmly in position.

Carrying

Reclining

Sitting