Grizzly H7507 - Manual (Page 9)

Model h7507 (Mfg. since 3/05)
-7-
Wear safety glasses dur-
ing the entire setup pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
SEcTION 2: SETUp
Needed for Setup
your machine was carefully packaged for safe
transportation. remove the packaging materials
from around your machine and inspect it. if you
discover the machine is damaged, please imme-
diately call Customer Service at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
This machine and its com-
ponents are very heavy.
get lifting help or use
power lifting equipment
such as a forklift to move
heavy items.
the following are needed to complete the setup
process, but are not included with the router table.
additional tools may be necessary if drilling or
tapping is required to install it.
Description Qty
• Safety glasses ........................................... 1
• Cleaner/degreaser ( page 10) .... as needed
• disposable Shop rags ............... as needed
• another person .......................................... 1
• Straightedge 4' ........................................... 1
• Screwdriver phillips #2 ............................... 1
• Wrenches or Sockets 8, 10, 14mm .......1 Ea
• drill Bit 3 ⁄
16
", 3 ⁄
8
" ......................................1 Ea
• Wood 1 1 ⁄
2
" x 2 1 ⁄
2
" x 28" ............................... 1
• Wood 2 3 ⁄
4
" x (Fence thickness) x 28" ........ 1
• Jointer ......................................................... 1
• *Wood Screws #10 x 2 ............................... 4
*Size may vary depending on thickness of
infeed and outfeed fence boards.