GSI Outdoors PNEG-1597 User Manual
Page 19
3. Assembly
PNEG-1597 Sweep Tractor Assembly Instructions
19
13. Assemble the 13 tooth sprocket to the motor shaft using square key (1/4" x 1" long).
14. Install the roller chain around the sprockets. Adjust the position of the tractor axle (shaft) if
necessary so as to align the chain correctly. Tighten the chain as required by adjusting the
nuts on the 5/8"-11 x 6" threaded rod.
NOTE: Tighten bearing lock collar.
Figure 3I
1/4" x 1" Square key
13 Tooth sprocket
Roller chain