GIGABYTE GA-8IR2003 - Manual (Page 43)

BIOS Setup
English
- 39 -
& & & & & ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1. (Default Value)
S3(STR) Set ACPI suspend type to S3.
& & & & & Power LED in S1 state
Blinking In standby mode(S1), power LED will blink. (Default Value)
Dual/Off In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
Power Management Setup
ACPI Suspend Type [S1(POS)] Item Help
Power LED in S1 state [Blinking] Menu Level
Soft-Off by PWR-BTTN [Instant-Off] [S1]
PME Event Wake Up [Enabled] Set suspend type to
ModemRingOn [Enabled] Power On Suspend under
Resume by Alarm [Disabled] ACPI OS
x Date (of Month) Alarm 0
x Time (hh:mm:ss) Alarm 0 : 0 : 0 [S3]
Power On by Mouse [Disabled] Set suspend type to
Power On by Keyboard [Disabled] Suspend to RAM under
x KB Power ON Password Enter ACPI OS
AC Back Function [Soft-Off]
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Figure 5: Power Management Setup