English, Step 1: install the central processing unit (cpu), Step 1-1: cpu installation – GIGABYTE GA-8IR2003 User Manual

Page 13: Angling the rod to 65, Pin1 indicator, Socket actuation lever

Text mode
Original mode

Hardware Installation Process

English

- 9 -

Step 1: Install the Central Processing Unit (CPU)

Step 1-1: CPU Installation

Please make sure the CPU type is supported by the motherboard.
If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause
improper installation. Please change the insert orientation.

Angling the
rod to 65

1. Angling the rod to 65-degree maybe feel a

kind of tight , and then continue pull the rod to
90-degree when a noise "cough" made.

2. Pull the rod to the 90-degree directly .

Pin1 indicator

3. CPU Top View

Pin1 indicator

4. Locate Pin 1 in the socket and look

for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.

Socket
Actuation
Lever