GE Monogram ZV30 - Manual (Page 8)

8
Light bulbs
The bulbs are located on the underside of the hood.
To change the light bulbs:
1. Remove the trim ring by turning it
counterclockwise.
2. Grasp the bulb on the edges and remove by
turning it counterclockwise.
3. Replace with the same type and size bulb.
These 120 volt, 50 watt, par 16 halogen flood
bulbs, with standard base, are available at specialty
lighting stores.
These bulbs can also be ordered from your
GE supplier.
Order bulb no. WB08X10028.
Stainless
steel Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm
sudsy water, a stainless steel cleaner such as
Kleen King
® , or an all-purpose liquid or spray
cleaner. Always wash in the direction of the
grain. Rinse thoroughly with a sponge or cloth
and clean water. Dry with a soft, clean cloth.
After cleaning, use a stainless steel polish, such
as Stainless Steel Magic
® , Revere Copper and
Stainless Steel Cleaner ® or Wenol All Purpose
Metal Polish ® . Follow the product instructions
for cleaning the stainless steel surface.
Care and Cleaning
Professional Range Hood
Warming
lamps The warming lamps are located on the
underside of the hood.
These 120 volt, 175 watt, par 38 infrared white
or red heat lamp bulbs, with standard base,
are available at some specialty lighting stores.
These infrared bulbs can also be ordered from
your GE supplier.
Order bulb no. WB08X10029.
NOTE: If warming lamps are not desired,
additional cooktop lighting can be obtained by
replacing the infrared bulbs with white 120 volt,
175 watt, par 38 bulbs, with standard base. These
bulbs are available at specialty lighting stores.