GT Mobile I801 - Manual (Page 78)

77
Close butler
In standby mode, press and hold 0 and select Close butler . You are
required to enter the phone unlock code before opening the option
menu. Please refer to P8
5
Other settings>Security setting>Phone lock
for detailed information on the phone lock.
Status
Select Status .
On: To turn on Close butler . In case your phone is not on hand, you can
send messages to your phone to do such remote control as locking or
switching off your phone, call diverting and canceling call diverting.
Off : To turn off Close butler .
Changing verify code
1. Select Edit verify code .
2. Enter the current verify code and the new code you want in
sequence. Then re-enter the new code.
3. Press the Dial key ( OK ).
Note:
♦ The default verify code is 1234. Please change the verify code
before using remote security.
♦ You are not allowed to change the verify code to the default one
(1234).
SMS control command
In case your phone is lost, you can have the following operations via
sending messages to the current phone number of your phone.