GarrettCom TB14H User Manual
Page 5
TB14 and TB14H 10Mb Media Converters
Installation and User Guide
iv
www GarrettCom com
.
.
Electrical Safety requirements:
1.
This product is to be installed Only in Restricted Access Areas
(Dedicated Equipment Rooms, Electrical Closets, or the like).
2.
48VDC products shall be installed with a readily accessible disconnect device
in the building installation supply circuit to the product.
3.
This product shall be provided with a maximum 10A DC Listed fuse or circuit
breaker in the supply circuit when connected to a 48V centralized DC source.
4.
The external power supply for DC units shall be a Listed, Direct Plug In
power unit, marked Class 2, or Listed ITE Power Supply, marked LP, which
has suitably rated output voltage (i.e. 24VDC or 48VDC) and suitable rated
output
current.
5.
Product does not contain user replaceable fuses. Any internal fuses can ONLY
be replaced by GarrettCom personnel through the RMA process.