Grizzly G9907 - Manual (Page 5)

G9907 Triangular Sander
-3 -
INTRODUCTION
Commentary
We are proud to offer the Grizzly Model
G9907 Triangular Sander. The Model
G9907 is part of a growing Grizzly family of
fine power tools. When used according to
the guidelines set forth in this manual, you
can expect years of trouble-free, enjoyable
operation and proof of Grizzly’s commit-
ment to customer satisfaction.
The Model G9907 Triangular Sander is the
perfect sander for detailed sanding tasks
and hard to reach corners. The pad rotates
at 8,000 orbits per minute with a .040"
eccentric motion for a finish without
scratches. Sanding pads have a 6 1 ⁄
4
square inch surface area, with flow
through holes to direct dust to the 1 1 ⁄
4
" dust
port. Pads are easily changed with the
hook-and-loop attachment system.
We are pleased to provide this manual
with the Model G9907. It was written to
encourage safety considerations and
guide you through general operating pro-
cedures and maintenance. It represents
our effort to produce the best documenta-
tion possible.
The specifications, details, and pho-
tographs in this manual represent the
Model G9907 as supplied when the manu-
al was prepared. However, owing to
Grizzly’s policy of continuous improve-
ment, changes may be made at any time
with no obligation on the part of Grizzly. If
you have any comments regarding this
manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C /
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
To operate this, or any power tool,
safely and efficiently, it is essential to
become as familiar with its character-
istics as possible. The time you invest
before you begin to use your Model
G9907 will be time well spent. DO NOT
operate this machine until you are
competely familiar with the contents of
this manual. Make sure you read and
understand all of the safety proce-
dures. If you do not understand some-
thing, DO NOT operate the machine.
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com