GIGABYTE GA-8I915MD-GV - Manual (Page 44)

GA-8I915MD-G/GA-8I915MD-GV Motherboard - 44 -
English
2-7 Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Frequency/Voltage Control
CPU Clock Ratio (Note) [15X]
Memory Frequency For [Auto]
Memory Frequency (Mhz) 533
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
Set CPU Ratio if CPU
Ratio is unlocked
CPU Clock Ratio (Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
Memory Frequency For
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency=533MHz,
3.00 Memory Frequency = Host clock X 3.00.
4 .00 Memory Frequency = Host clock X 4.00.
Auto Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=800MHz,
2.00 Memory Frequency = Host clock X 2.00.
2.66 Memory Frequency = Host clock X 2.66.
Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on Memory Frequency For setting.
Incorrect using these features may cause your system broken. For power end-user use only.
(Note) This item will show up when you install a processor that supports this function.