Grundig GLCD2208HDV - Manual (Page 15)

- 14 -
2. Connect the audio sources (including DVD and VCDR) to the Left and
Right AUDIO Input.
3. Connect the video source to the VIDEO Input via the RCA cable for basic
TV connection.
5. Insert the AC power into the DC adaptor, then connect the 12 Volt Input
from the TV to its DC Output.
6. To use the TV as a computer monitor, connect the PC through the VGA
Input via the VGA Cable.
TV Basic Operation
1. Press the POWER Button on the unit or on the remote control to turn the
TV on. The power indicator on the front of the TV will turn blue to indicate
power on. Press the POWER Button again to switch off the TV, the
indicator will turn red.
2. Press the VOL - or VOL + Button to adjust the volume level. Press the
VOL - Button to decrease the volume and press the VOL + Button to
increase the volume.
Changing Channels
1. Press the Input Button on the remote control to select the ATV, DTV,
DVD or media modes. If you are using the television for the first time, an
Installation Guide will be displayed to guide you through the initial
channel scan set up.
2.
Channel „1‟ will appear on the left top corner of the screen after initial the
channel scan is complete. Press the CH- or CH+ Button to select the
Auto Tuning