beautypg.com

Maintenance, Specifications – Garmin 190-00888-10 User Manual

Page 10

background image

10

Thru-Hull Intelliducer Installation Instructions

Step 5�: �pdate Your Chartplotter

: �pdate Your Chartplotter

If you are using the Intelliducer with an existing Garmin chartplotter, upgrade your Garmin

chartplotter with the latest software to ensure compatibility with the Intelliducer. For more

information, visit

www.garmin.com

.

Maintenance

You must regularly maintain and clean your Intelliducer to get the best results.

Antifouling paint

If you are using the Intelliducer in salt water, you must coat the submerged surface of the

Intelliducer with antifouling paint. Use only water-based antifouling paint, because other paints

may damage the Intelliducer. Re-apply the paint at the beginning of each season.

Cleaning

Clean the submerged surface of the Intelliducer regularly to keep it clear of aquatic growth. The

performance of the Intelliducer will be greatly reduced if the surface collects a large amount of

growth. Use a scour pad (lightly) and a mild detergent to clean the surface. Avoid scratching the

surface as much as possible.

Specifications

Physical

unit Dimensions:

4

19

/

32

in. (116.3 mm) L × 4 in. (101.4 mm) W × 3 in. (76.2 mm) D

Weight:

13 oz. (364 g)

Cables:

NMEA 2000 drop cable — 19 ft. 8 in. (6 m)

NMEA 0183 power/data cable — 29 ft. 6 in. (9 m)

temperature range: From -15°C to 33°C (from 5°F to 91°F)

Case Material:

PC/PBT and ASA plastic

Power

Power input source: NMEA 2000 — 9–16 Vdc

NMEA 0183 — 9–33 Vdc

Fuse (NMeA 0183): 2 A

Main power usage: 2 W max

NMeA 2000 Load equivalency Number (LeN): 4

Sonar

Power:

150 W (RMS), 1,200 W (peak-to-peak)

Frequency:

160 kHz

Depth:

900 ft. (275 m) (Depth capacity is dependent on water salinity, bottom

type, and other water conditions.)