Control settings, About the control settings – GE DVL223 User Manual

Page 7

Automatic cycles automatically determine fabric dryness. Select MORE DRY for heavier fabrics, LESS DRY for lighter
fabrics. Timed cycles run for a selected time.

Drying Cycles

AUTOMATIC COTTONS

For cottons and most linens. For most loads select the Preferred Regular Setting marked with an

∗

AUTO COTTONS.

AUTOMATIC PERMANENT

For synthetic blends and delicates.

PRESS

TIMED DRY

Set the Cycle Selector at the desired drying time.

TIMED FLUFF

(NO HEAT) For “fluffing” items without heat.

Temperature

REGULAR

For regular to heavy cottons.

MEDIUM

For synthetics, blends, delicates and items labeled permanent press.

FLUFF

For fluffing items without heat. Use the

TIMED DRY cycle.

Start

— Close the dryer door. Turn the START control clockwise to START. Hold for 1-2 seconds and release. Opening

the door during operation will stop the dryer. To restart the dryer, close the door and select START to
complete the cycle.

NOTE: Drying times will vary according to the type of heat used (Electric, Natural or LP gas), size of
load, types of fabrics, wetness of clothes and condition of exhaust ducts.

www.GEAppliances.com

Consumer Support

Troubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

START

LESS DRY

COOL
DOWN

80 MIN

MORE DRY

AUTOMATIC

PERMANENT

PRESS

AUTOMATIC
COTTONS

TIMED DRY

LESS DRY

TEMPERATURE

MEDIUM

REGULAR

FLUFF

Model DCL333

About the control settings.

NOTE: Not all features are available on all dryer models.

IMPORTANT: Clean the lint filter each time you use the dryer.