Goodman Mfg SS-DSZC18 - Manual (Page 24)

24 www.goodmanmfg.com SS-DSZC18 SS-DSZC18 www.goodmanmfg.com PB
P
roduct
S
PecificationS
P
roduct
S
PecificationS
Goodman Manufacturing Company, L.P., reserves the right to discontinue, or change at any time, specifications or designs without
notice or without incurring obligations. © 2013 • Goodman Manufacturing Company, L.P. • Houston, Texas • Printed in the USA.
a
CCeSSoRieS
Model Description
DSZC18
036
DSZC18
048
DSZC18
060
ABK-20 Anchor Bracket Kit *
B1141643¹ 24V Transformer X X X
CSR-U-1 Hard-start Kit X
CSR-U-2 Hard-start Kit X X X
CSR-U-3 Hard-start Kit X X
FSK01A² Freeze Protection Kit X X X
OT18-60A³ Outdoor Thermostat/Lockout Thermostat X X X
TX2N4⁴ TXV Kit
TX2N4A⁴ TXV Kit
TX3N4⁴ TXV Kit X
TX5N4⁴ TXV Kit X X
* Contains 20 brackets; four brackets needed to anchor unit to pad
¹ Available in 24V legacy mode only. This feature is integrated in the communicating mode.
² Installed on indoor coil
³ Available in 24V legacy mode only. This feature is integrated in the communicating mode. Required for heat
pump applications where ambient temperature falls below 0 0F with 50% or higher relative humidity.
⁴ Condensing units and heat pumps with reciprocating compressors require the use of start-assist components
when used in conjunction with an indoor coil using a non-bleed thermal expansion valve refrigerant metering de-
vice or liquid line solenoid kit. The TXV should always be sized based on the tonnage of the outdoor unit.