Clearing jammed nails – Grizzly H6143 User Manual

Page 12

H6143 16 Ga. Finish Nailer

-10

A jammed nail must be cleared before using
the nailer again.

To clear a jammed nail from the dis-
charge area:

1. DISCONNECT NAILER FROM THE

AIR SUPPLY!

2. Pull back and latch the magazine

pusher.

3. Remove the nail stick from the maga-

zine.

Clearing Jammed

Nails

Figure 7. Nose opened to clear a jam.

Nose Cover

Nose Release

Nose Tip

4. Open the nailer nose by removing the

rubber nose tip, squeezing the nose
release mechanism (

Figure 7), and

opening the nose cover.

5. Dislodge the jammed nail with a tool

that will fit in the slot on the underside
of the nose.

6. Throw the damaged nail away and

insert a new nail stick that only contains
clean, undamaged nails. DO NOT use
dirty or damaged nails!

7. Release the catch lever and let the

pusher slide to the front of the maga-
zine.