GIGABYTE GN-A16B - Manual (Page 21)

GN-A16B Wireless Access Point User Guide
21
If you want to get IP address from the DHCP server automatically on your network,
you will select “Client Enabled”. Or you want to use the Access Point as a DHCP
server to automatically assign dynamic IP address on the network, you will select
“Server Enabled”
1 DHCP Client Range & DNS
If you select the “Server Enabled” setting, please input the IP address range and the
DNS for your network. The DNS information provied by your ISP company.
1 802.1d Spanning Tree
Enabled or Disabled the 802.1d Spanning Tree function. The default setting is
Disabled.
Verify the desired setting and then click the “Apply” button to set the value into access
point.
1 DHCP Mode
There are four settings under this option you can choose: “Disabled”, “Client
Enabled”, “Server Enabled” and “Auto”. Disabled is the default setting.