Genie sLc - Manual (Page 9)

33
Ladder for
Increased access
Attaching the sturdy aluminum
ladder accessory makes your
Genie
® Lift ™ a combination
lift truck and stepladder for
increased access to lifting and
installation tasks. (Available on
standard and straddle base
models; not available with
electric winch option.) The
standard winch can be used
while the ladder is in
use or stowed.
M AT E R I A L L I F T S
|
G L
GenIe ® LIft ™ ModeLs avaILabLe
GL ™ -4 GL ™ -8 GL ™ -10 GL ™ -12
coMpact,
ManeuverabLe desIGn
The telescoping aluminum frame design makes
the unit extremely compact. Plus, the durable
steel forks can be reversed for greater flexibility. In
addition, the winch handle is reversible, and a hold-
down mechanism secures the carriage for easy
transport and storage.
WheeLs and
casters
8 in (20 cm) non-marking
rear wheels and 2 in (5 cm)
dual-wheel, front-swivel casters
are standard on the standard
and straddle base models.
5 in (12 cm) rear-swivel casters
with side brakes and fixed 4 in
(10 cm) front wheels are
standard on the counterweight
base model.
eLectrIc WInch for faster LIftInG
The electric winch option comes with a battery pack and an automatic charger that
shuts itself off when fully charged. The electric winch control cable extends 5.8 ft
(1.77 m) for added mobility. It’s available with the standard base and counterweight
base models. A caster option kit is required for use with straddle base model
(factory-installed only).
pLatforM for
Load handLInG
The optional load platform fits
easily over forks to handle odd-
shaped loads and can also be
used as a portable work table.
booM for
added versatILIty
The boom option turns your
Genie
® Lift ™ into a vertical crane
or hoist capable of lifting 210 to
500 lbs (95 to 227 kg) with up
to 20 in (51 cm) of reach.