GE Monogram ZIDI240 - Manual (Page 9)

9
Controls and Features
Double-Drawer Refrigerator
Snugger The snugger attached to the glass divider
helps prevent tipping, spilling or sliding
of small items when the top drawer is
opened. Lift the lock down lever near the
top of the snugger, then move it to fit your
needs. Press the lever down to lock the
snugger in place.
The snugger is dishwasher safe,
top rack only.
Glass
divider The top drawer has a moveable, tempered
glass divider for separating and organizing
foods. The divider can be placed in one of
two locations.
To remove the divider, lift up until divider
clears the rear and front retaining slots.
To replace the divider, slide into one of
the divider locations.
The glass divider is dishwasher safe,
top rack only.
Divider locations
Glass divider
Lever
Snugger
Assembly
instructions To remove:
1. Lift the glass divider assembly out of
the drawer by grasping the glass divider
and snugger where the lever is located.
Sit the assembly on a sturdy surface.
2. Lift the lever.
3. Slide the snugger off the glass divider.
4. Remove the lever from the snugger by
lifting the lever up and sliding it down
and out of the assembly.
NOTE: The glass divider, snugger
and lever can be cleaned on the
top rack of a dishwasher.
To replace or relocate:
1. Reassemble lever into snugger by sliding
the lever up into place.
2. Slide glass divider into the snugger.
The lever must be installed before sliding
the divider into the snugger.
3. Put the glass divider assembly in the
desired divider location in the top drawer.
Lever
Snugger
Glass
divider
Lever
Locked
Unlocked
(1)
(2)