Gefen EXTRA LONG RANGE EXTENDER GTB-HDKVM-ELR - Manual (Page 16)

13
WALL MOUNTING INSTRUCTIONS
The GefenToolBox HDKVM Extra Long Range Extender Sender Unit and
Receiver Unit may be mounted vertically on a wall or in a cabinet with wood/
drywall screws as shown in the diagram above. There should be an inch or two
of clearance between the edges of the unit and any walls or vertical surfaces
to allow for enough clearance for insertion and retraction of all input and output
cables.
For installation on a drywall surface, use a #6 drywall screw. It is recommended
when installing on a drywall surface that studs be used to secure the Extender
should undue stress be applied when connecting and disconnecting cables.